Outdoor spa maintenance free#

Using a soft brush, dislodge any remaining debris.

It’s also important to regularly remove the debris it has collected so that it is no longer in contact with the water. Regular cleaning (once a month depending on use and bather volume) ensures the filter will operate trouble-free. More if the bather load and use in general of the spa is high.Ī weekly inspection and maintenance of your filter should help to ensure this system operates optimally. Ideally, you should run your filtration system for a four hour cycle, twice per day at a minimum for what would be considered regular use of your spa. Therefore, as any of these activities increase, increased test frequency and additional sanitizer will likely be required.įiltration is an important contributor to the state of your water. High bather load, high water temperature and the aeration caused by jets all contribute to deterioration in sanitizer. Health Canada requires the use of at least one of these sanitizing agents. Too high lowers the effectiveness of sanitizers which can result in bacteria and algae growth.Ĭhlorines and Bromine are two of the most common sanitizers used in Spas. Too low and corrosion can take place in pipes, filters, pumps and other parts and components of your spa. Two of the most important readings are pH and sanitizer levels. We recommend three times per week with a test kit or test strips more often if the frequency of use and bather load is high. Regular testing of your spa’s water is important. Keep your spa cover clean regularly using a fabric protector on it. If so equipped, check your spa’s skimmer frequently, removing any debris that may have been captured that might affect its performance. whenever you are experiencing a heavy chlorine type odour.

Check and clean your filter after each 24 hr session.īe sure your pH and sanitizer levels are at optimum levels.Īdd Spa Shock. If these levels do not appear to be adequate or if water clarity becomes an issue, run your filter for the next 24 hours to see if this clears up the issue. For average use increase the running time to 4 hours each cycle, twice per day. Run your spa filter a minimum of 2 hours, twice per day.

Outdoor spa maintenance free#

In fact, it can make sense to drain your water more frequently instead of always using chemicals to balance or correct your water.Ĭheck your filter on a regular basis to ensure it is clean and free of any major debris blocking its performance.

Your spa should be drained, cleaned and refilled with fresh water at least every 6 months, more often under heavy bather loads.